Camera Cable Harness
CAMERA CABLE HARNESS
Rent the Sky Films
Rent the Sky Films allows you to print custom cable adapters for a 15 lb, handheld 3D camera to replace conventional 100-pound rigs. These adapters combine cabling to a single point, making it easier to operate the camera.
MARTAC designs and manufactures next generation high performance unmanned aquatic vessels. In order to cool the motors on these vessels, they route cool seawater inward from the outside of the boat. By printing the water pickups, they drastically cut fabrication costs on what would be an incredibly difficult part to fabricate. Onyx is robust enough to survive both ocean debris and corrosive seawater.
PRESS BRAKE TOOLING
Centerline Engineering Solutions
Centerline Engineered Solutions fabricates formed steel parts with an industrial press brake. In order to fabricate each part, Centerline has to make a unique punch and die. For most applications, the cost of this specialized tooling does not justify the expense of the part. By printing the tooling out of Onyx and reinforcing critical points with steel inserts, Centerline creates forming tooling at a vastly lower cost.